Thursday, September 26, 2019
Project Portfolio Management Concepts Research Paper
Project Portfolio Management Concepts - Research Paper Example His essay shall identify 4 articles that address Project Portfolio management and then evaluate the quality and utility of each. However, the subject matter shall focus on the article considered to be bearing the highest quality and utility. The following 4 articles were chosen for the analysis: How to Implement management of Portfolio within 100 days, Craig Kilford, N.Y: Stationery Office, 2013. Internet resource {http://www.best-management-practice.com/gempdf/How_to_implement_MoP_ONS_Case_Study.pdf} The author of this article, Craig Kilford has worked as an Interim Deputy Director of Portfolio Management in the office for the National Statistics. He is also a regular blogger at www.MrPortfolioManagement.com. He is also a motivational speaker at various business conferences. His achievements in the field of Portfolio invoke the public to catch his writings. In the article ââ¬ËHow to implement management of Portfolio within 100 days,ââ¬â¢ Craig tells the audiences about the doà ¢â¬â¢s and donââ¬â¢ts which they practiced when their organization, the Office for National Statistics intended to implement a Project for managing a Portfolio within a period of a hundred days. He highlights the position of the ONS before the implementation, the journey towards delivering the portfolio, the unit model for delivering the portfolio, the portfolio Governing model and the future of the ONS. Craig also highlights the top 8 requirements that are crucial for the implementation of the Project Portfolio Management within a period of 100 days. Project Portfolio Management, Gartner, N. J: Wiley, 2013. Internet Resource. {http://www.gartner.com/it/content/911400/911412/project_portfolio_mgmt_excerpt.pdf} This article does not highlight the achievement s of the author, but it seem to be focused on its subject matter: Project Portfolio management: A view from the management trenches. The article highlights the features of a successful Project Management Portfolio, the metho ds of optimizing the capacity of an organization, the checkpoints of a good Project Management Portfolio, how to incorporate changes in to a Project Management Portfolio, the Project Management Portfolio tiers, the areas to put up a Project Management Portfolio, the period and reasons when a Project Management Portfolio should be established, the foundational principles and tools for establishing a Project Management Portfolio. The articles targets the business community as its primary audiences, however, the interested public would also find the message to be vital. Project Portfolio Management:Metrics that Work, James C. B., 2012. Internet Resource. {http://www.bw.edu/academics/cpd/forums/Project_Portfolio_Management_March_2011.pdf} There is no clear information about the author, James Brown. Howevr, he is the current manager of the Research Portfolio Managing Officer of the Pionner Hi-Bred International. The article highlights the interests of any Project Portfolio management, th e mandatory contents of a Project Portfolio
Wednesday, September 25, 2019
Brand Analysis Essay Example | Topics and Well Written Essays - 1000 words - 1
Brand Analysis - Essay Example After a few years, Starbucks completely redefined the American coffee shops. High priced Brews, Lattes, Moccachinos, Cappuccinos and Frappes awakened the senses of 50 million customers across the globe (Burks, 2009, p.01). The company was formed in 1971, in Seattle. It was an initiative of a group of three friends-Gordon Bowker, Jerry Baldwin and Zev. Initially, the store was named as ââ¬ËStarbucks coffee, Tea and Spicesââ¬â¢ (Burks, 2009, p.01) and the brand logo depicted a chocolate brown colored two tailed mermaid (Gilbert, 2008, p. 13). Later, the name of the store was changed to ââ¬ËStarbucksââ¬â¢ and its logo was re-colored to bright green. Starbucks was initially formed with the motto of selling good coffee with a unique flavor that a regular coffee brand wouldnââ¬â¢t offer. After the company was listed in the National Association of Securities Dealers Automated Quotation (NASDAQ), the growth of the company accelerated and it opened 16,680 stores across the glob e. Today, it has become a global brand with its footing in 47 countries around the world and its net revenue reaching over $ 10 billion (Burks, 2009, p.06). Most of the consumers associate a brand with its logo, which reminds them of the brand promise that an organization makes. Brand Promise of a company is an attempt to make a promise for the benefits of the customers, conveying it and then delivering the promise through their products or service (Pringle, 2008, p.103). The brand logo should be very distinctive. Either the concept of the logo should be unique or colors used in the logo should be vibrant enough to attract the customers. Starbucks remained true to its vision and its promise to use the best quality beans. Consumers generally prefer Arabica beans over Robusta coffee beans. Arabica coffee accounts for 75% production of coffee beans all over the world (Burks, 2009, p.07). Brand Personality refers to a set of human like attributes associated with a particular brand. Bran d personality enhances the appeal of the brand to the consumers. Most of the consumers associate a brand to a personââ¬â¢s character; it can take the form of an actual person, animated figure or generalized person (Gelder, 2005, p. 41). Coffee consumption in America was not as high as in Scandinavia. From the 1990ââ¬â¢s the American coffee market scenario completely changed when Starbuckââ¬â¢s redefined the coffee houses. The European Coffee houses were traditional and had an old charm to it and a warm atmosphere. Starbuck stores were modern and hip, offering variety of coffees including hot and cold beverages, fancy decoration, positive and uplifting environment and an access to Wireless Local Area Network connection (Strehle & Cruickshank, 2004, p.03). They connected with the requirements of customers. As the customerââ¬â¢s taste and preferences change, the company tries hard to introduce new flavors of coffee which suits the taste buds of the consumers (Rakocevic, 201 1, p. 13). Brand Value helps in differentiating between right and wrong. The brand values provide a perspective on how the company is expected to act towards its consumers. When a company expands its network in other countries, the original values are hard to retain because different countries have different cultural values and ethics (Gelder, 2005, p. 37). Starbucksââ¬â¢ success can be attributed to a strategy that focused on different sets of value drivers rather than on three big competitors: 1. Quality instead of quantity; 2. Restaurants instead of grocery stores; 3.Close
Tuesday, September 24, 2019
Net Present Value and Internal Rate of Return Assignment
Net Present Value and Internal Rate of Return - Assignment Example Table 1 shows the cash inflow expected to be generated and the cash outflow expected to be incurred should the proposed expansion be undertaken. During the first year, the company will incur expenses to finance the purchase of the new plant and equipment costing 5,000,000. It is assumed that this amount will be a one time expense fully incurred during the first year. This report also recognized the need to recognize the investment in research and development already incurred by the company. The rationale behind this is to fully and adequately evaluate the profitability of the project. It should be noted that in order to come up with a proper valuation, the company should account for all the revenues and expenses generated by the project. Thus, it is inclusive of all the expenses incurred to bring the project in operation. Research and development cost of 900,000 should be accounted for because without it, the expansion will be impossible to pursue. During 2005, the amount of 1,800,000 to cover additional working capital expenses is also included in the cash outlay required. However, management also expects that after five years, this amount will be freed up and can be readily used by other projects. Thus, Table 1 also shows that during 2005, the company will be needing 1,800,000 while this amount will be available during 2010. In the case of the overhead costs, this report decided to use the 300,000 per annum as estimated by the project development team advisor. This is deemed appropriate as allocating 50% of the wages is just an estimate. It should also be noted that depreciation expense will not be included in the computation of the NPV because cash flow is not directly affected by the account. As taxes and inflation are excluded in the analysis, tax shield from depreciation will not be considered. The computation for NPV is shown in Table 2. Since the company is using 14% as the required rate of return for the expansion, the cash flows are discounted at the same rate. According to the computation in Table 2, the NPV of the expansion using 14% cost of capital is (403.47). Table 2. Discounted Cash Flow and NPV for Expansion (2005-2010, in thousand) 2005 2006 2007 2008 2009 2010 Total Inflow/ (Outflow) (8500) 2,040 1,940 2,140 2,140 3,940 Present Value Factor (14%) 1.0000 0.8722 0.7695 0.6750 0.5921 0.5194 Present Value (8500) 1789.4 1492.8 1444.5 1267.0 2046.4 NET PRESE NT VALUE (403.47) Internal Rate of Return The internal rate of return is the cost of capital which equates the net present value of all cash flow to zero. The IRR can be computed by calculating the NPV at different interest rates. Utilizing this method, we come up with Figure 1 which shows that IRR is approximately 12%. Figure 1 . NPV at Different Cost of Capital Question 2. Prepare an informal report for the Board of
Monday, September 23, 2019
Which aspects of McDonald's organisational culture are considered to Dissertation - 1
Which aspects of McDonald's organisational culture are considered to be strong compared to competitors - Dissertation Example Organizational culture is a topic that is well-studied, and it basically means that organizations have a certain set of values and beliefs that are unique to that organization. Because culture needs to be spread, and there must be a method for this method to spread, this is a topic of consideration and is the focus of this paper. In particular, a vision is something that permeates organizations and, if this vision is positive and committed to by the employees of the company, the vision can make the organization great. This vision thus guides the organization, and underpins the culture. Another variable is that of leadership, as leadership has a great effect on organizational culture. Toxic leaders may lead to toxic work environments, so the organizational culture would be adversely affected. Conversely, effective leaders may lead to effective teams, and this would positively affect the organizational culture. The different kinds of leaders, and how these leaders operate, is another f ocus of this paper. Lastly, since McDonaldââ¬â¢s is a multinational corporation, the concept of cultural distance must be touched upon. This is another focus. The results sections will extrapolate the data that was found on McDonaldââ¬â¢s and relate this data to the information presented in the literature review. Hence, it can be shown why McDonaldââ¬â¢s is the dominant player in the fast food market around the world. The literature review is divided into four sections ââ¬â literature regarding organizational culture in general, followed by literature regarding vision, literature regarding leadership, and literature regarding cultural distance. The research section is next, and describes the kind of research undertaken, which is secondary research, and how the particular topic was researched. Next comes the results, which are tied into the literature found in the literature review. A conclusion tying it all together concludes the paper. Literature Review The Meaning of Organizational Culture Organizational culture is ââ¬Å"the coding of values and deeply-held beliefs that mold an organization's decision patterns, guide its actions, and drive individual behaviorâ⬠(Dauphinais & Price, 1998, p. 190). An organizational culture is made up of patterns of belief that are rooted in the values, norms and informal activities of the organization (Ivancevich et al., 2008, p. 503). Both members and outsiders are cognizant of a particular organizationââ¬â¢s culture, as the organization makes its organizational culture visible (Dauphinais & Price, 1998, p. 190). At the same time, because it is comprised of beliefs, values and attitudes, all intangible qualities, it is subtle and invisible. The culture may be either beneficial or destructive. If based upon a positive vision, which is discussed below, the cultural organization is beneficial to the organization. Alternatively, if the belief system upon which the organizational culture is based is flawed, and does not fit the vision, then it can be destructive and will drive the organization on to mediocrity, not greatness. Moreover, the organizational culture is often driven by the bottom up, as opposed to top down, according to Dauphinais & Price, as the ways that the broad masses of the organization behave dictates the culture of the organization. Therefore, the organizational culture may be created by rewards, measures and ââ¬Å"carefully structured people practicesâ⬠Vision as a Part of Organizational Culture Part of the organizational culture is the vision that permeates throughout the organization, especially if the organization is strong and is able to have a shared vision. According to Senge (1990), a shared vision is vital for a successful company and should be one of the top priorities. The companyââ¬â¢s vision is one to which the people of the organization must commit themselves. Yet, the successful company also realizes that there are thousands of individual vis ions for the companies, or, in the case of McDonaldââ¬â¢s, millions of different visions, as each employee may have their
Sunday, September 22, 2019
A National PE Curriculum Model or a Program Framework Research Paper
A National PE Curriculum Model or a Program Framework - Research Paper Example SEPEP is distinguished from any other physical education programs mainly by its focus on the staging of a sports tournament. Throughout the program, the students organize and manage the sporting competition. It is expected that they would learn about sports effectively at the same time gain practical and theoretical insights with respect to the roles and dynamics of sports in real life. In this vein, one also recalls the main characteristic and goal of the authentic model, which is to teach sports by creating an authentic setting and experience for learners. Particularly, there is an emphasis on the diversity of roles. The authentic model makes sure that students do not merely participate as players but also take the role of referee, scorekeepers, record takers, performance reporters, coach and team managers. The main difference, however, is that the SEPEP framework is broader for the students with the added responsibility of having to organize the sporting event itself. This is part icularly important especially when one takes into account a recognized theory that, in order for physical education to be effective ââ¬â that it exerts a meaningful impact to the studentsââ¬â¢ life - it must be taught within the social context as enacted in the community (Burrows, Macdonald & Wright, p. 64). The idea is that students are in a better position to learn concepts such as teamwork, fitness and fair play, among others. The SEPEP as teaching framework is an interesting model. It entails a different approach with respect to the teacher and the students; roles.
Saturday, September 21, 2019
Sonnys Blues Essay Example for Free
Sonnys Blues Essay James Baldwins fictional story, Sonnys Blues, is a short tale between two brothers who grew up in Harlem a place where drugs are known to destroy lives of many young people. The narrators brother, Sonny, is one of those young people addicted to drugs and the narrator got the news that his brother was imprisoned for illegal possession of heroin. Even though the narrator became worried about his brothers bleak future because of drug addiction, the narrator did not reconcile with his brother until the death of his daughter. With this turn of events, the narrator reunited with his brother through letters and finally upon Sonnys freedom from prison. The narrator remembered his mothers last will for him to take care and look after his younger brother, which he was not able to do. This memory and their conversations helped the narrator understand Sonnys perception of life. Even though he and Sonny were very different, the narrator finally understood Sonny as he played his jazz music that described his deep emotions and blues (Baldwin 1-25). Character The narrator is Sonnys unnamed older brother who is a high school teacher in Harlem. His character is very much the opposite of Sonnys. Despite the more common ill-fated living in Harlem, the narrator is a successful man as shown in his occupation and family. However, he is a failure in terms of looking after his brother as his mother had wished before death. On the other hand, Sonny is a musically inclined person who resorted to drugs in order to keep himself from being overwhelmed by the suffering in his surroundings. His contrasting personality from his brother also built the gap and separation between them. Unlike his brother, Sonny was not able effectively cope with his situation that led to his faulty decisions in life. However, all his angsts, angers, and other deep emotions were expressed passionately through his music. Theme The theme of the fictional story revolved around the concept of love between brothers. The narrator and Sonny are brothers who were separated by their differences. However, the meaning of the story tells the readers that no matter how different brothers are, they are obligated to love each other. This can be shown by supporting and understanding each other and seeing through their differences. Brotherly love is also illustrated by not killing the hope that a misguided or misled brother can find his way back, in this case, through Sonnys music. Conflict, Crisis, Resolution The conflict in the story revolved around the narrators doubt about Sonnys capacity for change. Many times over, the narrator did not trust that Sonny can change for the better, hence he did not put much effort in understanding his brother. Even though the narrator did not explicitly show this, Sonny was able to feel the doubt from the narrator and other people around him though he did not express his feelings. The turning point that bridged the gap between the two brothers was when the narrator remembered his promise to his mother to look after his brother. Hence, when Sonny poured out his feelings in his music, the narrator was finally able to understand and accept his brother. Point of View The story is told in the first person through the point of view of the narrator who is a main character in the story. The narrator is the older brother of Sonny who began narrating the story by saying, ââ¬Å"I read about it in the paper, in the subway, on my way to work. I read it, and I couldnt believe it, and I read it againâ⬠(Baldwin 1). The use of the first person, I, suggests that the focus of telling the story is through the eyes of the narrator. This means that all revelations and emotions are told to the readers as the narrator perceives them from other characters. Works Cited Baldwin, James. ââ¬Å"Sonnys Bluesâ⬠. Web. 6 July 2010
Friday, September 20, 2019
Methods Of Electricity Production Engineering Essay
Methods Of Electricity Production Engineering Essay Electricity plays a major part in our society today. It is used in our hospitals, in our banks, in our homes, and in our cars. No matter what we do, we couldnt live without it. But all this electricity doesnt just appear at when we need it, we must create it. All over the world, there is millions of electricity generating stations. Some of these are small, others huge. Some of the stations run on the power of fire and steam, while others run on the power of the wind or falling water. Some even use the power of the sun alone to generate electricity. But with so many different ways to produce electricity, how do we know which ways are the most efficient and the most environmentally effective? Task 2 Electromagnetic induction is a phenomenon that occurs when a magnetic field intersects a piece of metal, most commonly a piece of wire, which can be affected by magnets. The most common method to induce is to create a magnetic field in such a way that the field intersects a coil of wire. This can be done in multiple ways, although the main two ways are to either pass a magnet through the center of a coil of wire, or to move a coil of wire in a magnetic field. However, if both the coil of wire and the magnet are both stationary, no electric current will be produced. The circuit must also be closed for a current to flow. The most efficient way to produce a current is to rotate a coil in a magnetic field. There is three ways that the amount of power generated by electromagnetic magnetic induction can be increased: Increasing the strength of the magnetic field. Increasing the amount of turns in the coil that is being affected by the magnetic field. Increasing the speed at which the magnetic field intersects the coil. In most power stations however, the generators used spin the magnets, or in most cases, electromagnets, around the wire. This enables a greater amount of coils to be used without the need to rotate a greater mass. The stations use turbines to rotate the magnets or coils. To rotate the turbines, a power source is needed. There are four main power sources that are used: Coal Burning Coal burning power stations use coal that has been mined out of the earth. This coal is burnt to create heat. The heat makes water evaporate into steam. As the steam rises, it hits rotors which spin the turbines. Nuclear Reactions Nuclear reactors work in somewhat the same way as a coal burning power station. These power stations use the power of a nuclear reaction to create the heat needed to boil the water that then turns to steam, which then turns the turbines. When the water is heated however, it becomes radioactive. This means that the water must be kept in a separate chamber to the water that will turn to steam. The radioactive water heats the clean water by means of conduction. Wind Wind farms, as they are commonly called, use the power of the wind to rotate massive rotor blades. These rotor blades turn a shaft that is connected to a generator, thus producing electricity. Gravity The most common of power stations that utilize gravity are called hydro power stations. These use falling water to turn the turbines at the base of a mountain. As the water comes down the mountain, it is pulled by the force of gravity, making it travel at high speeds, which turns the turbines faster, which makes more electricity. Another power source that is used to create electricity is the energy produced from the Sun. Solar panels collect solar radiation from the sun and actively converts that energy to electricity. Solar panels are comprised of several individual solar cells. These solar cells function similarly to large semiconductors and utilize a large-area junction diode. When the solar cells are exposed to sunlight, the junction diodes convert the energy from sunlight into usable electrical energy. The energy generated from photons striking the surface of the solar panel allows electrons to be knocked out of their orbits and released, and electric fields in the solar cells pull these free electrons in a directional current, from which metal contacts in the solar cell can generate electricity. The conversion of sunlight to usable electrical energy is called the Photovoltaic Effect. After the electricity has been generated, it needs to be transmitted around the country. When electricity passes through a wire, some of the energy is lost as heat energy. In small devices, this is generally ignored because the wires are short enough for the energy that is lost as heat to be quite minimal. When the length of the wire increases, the amount of energy that is lost as heat also increases. This can be a problem when the wires are spanning thousands of kilometers. The reason for the lost of energy as heat is because of the current. This means that current is proportional to heat lost. Since this is the case, if the current is dropped to almost zero, then the energy lost as heat will also drop to almost zero. This can be done with the use of transformers. Transformers work on the law of magnetic induction. This is done by passing a magnetic field through a primary coil of wire. The magnetic field produced by the current can be used to create a current in a secondary coil. If there is twice the amount of coils in the secondary coil as there is in the primary coil. The current will be halved and vice versa. When the current is lowered, the process is transformed is referred to as a step-up transformer, and when the current is doubled, it is a step-down transformer. When the current is changed, the voltage is also changed. This is because current is inversely proportion to the voltage. This means if the current is halved, the voltage is doubled. This means when a step-up transformer halves the current, it doubles the voltage. To get the current as low as possible, the current must be brought up to around two hundred and twenty thousand volts. Task 3 Aim: To research the amount of energy three different types of power plants produce and compare their environmental impacts. Method: Three main power plants from within the state of Queensland were chosen to be examined. The plants chosen were; Tarong coal burning power plant, Wivenhoe hydroelectric power station, and the Hillcrest Christian College solar panel power plant. Research on these specific power plants was completed by using in-class and as homework. When all the needed research was acquired, the data was examined and a conclusion was drawn on which plant provided the most power, which plant was the most environmentally friendly, and which plant had the least intensity+. Results: Three sets of data have been collected: Tarong Power Station*# Date Tons CO2 MWh Energy Intensity 2000 9,196,047 7,913,802 2,324 2010 9,841,752 8,523,634 2,309 2020 9,956,845 8,633,139 2,307 Wivenhoe Power Station*#^ Date Tons CO2 MWh Energy Intensity 2000 0 1,052,437 0 2010 0 973,419 0 2020 603,438 2,109,812 572 Hillcrest Power Plant Date Tons CO2 MWh Energy Intensity 1-Jul-09 0 0.5353 0 1-Aug-09 0 0.7521 0 1-Sep-09 0 0.8029 0 1-Oct-09 0 0.7752 0 1-Nov-09 0 0.7237 0 1-Dec-09 0 0.6808 0 1-Jan-10 0 0.7036 0 1-Feb-10 0 0.5804 0 2009/2010 (Average) 0 0.69425 0 +: Pounds of CO2 emitted per megawatt-hour of electricity produced. *: The data collected also was coupled with a projected output for the next decade ^: The power station plans on a future upgrade that will produce carbon pollution #: Average decade output This data was put in the corresponding tables for comparison. Discussion: By looking at the data above it two main points can be made: Energy Output When the Tarong and Wivenhoe power stations are compared, it can be observed that the Tarong coal burning station produces a far larger amount of energy. It must be kept in mind that the Tarong station is a far larger station when compared to either of the other to stations examined, with the Tarong station having a maximum power output of over 1400MW, where as the Wivenhoe station has a maximum power output of only 500MW, and the Hillcrest plants power output depends on the intensity of the sunlight it receives. Even if the maximum output for the Wivenhoe station was over three times the size, putting the maximum output to 1500MW, theoretically, it would still be producing less energy than the Tarong station. It would also be highly unfeasible to achieve the same energy output with the Hillcrest plant as the maximum power output would have to be increased by at least sixteen million times. This puts the Tarong coal burning station as the most economically effective power station out of the three. CO2 Emissions At the current date, both the Wivenhoe station and the Hillcrest plant are producing no carbon emissions at all, where as the Tarong station is producing a very high amount of CO2. This puts the Wivenhoe station and the Hillcrest plant on equal ground in this aspect. In the future however, the Wivenhoe station is planning on installing upgrades to their station which, presumably, will force the plant to start giving off CO2 emissions. Up until these upgrades are made, the two stations are on the same level with CO2 emissions, but as soon as the upgrades are made, the Hillcrest solar power plant will be the most environmentally effective out of the three stations researched. Even though all the power stations that were examined are the few main ways that energy is generated in our current society, there are many other ways that the energy that we use gets generated. These consist of power stations that use means of; Biomass energy, wind energy, nuclear energy, tidal energy, combustion energy. These ways are examined in more depth below: Biomass Energy Biomass energy uses the biodegradable waste products of our everyday lives, such as plant waste or animal matter, to create either a thermal or chemical conversion. During these conversions, the matter undergoes chemical reactions that produce either heat or other chemicals that can be used in other items. This method of green energy is very environmentally friendly as it takes the form of what typically happens in our natural world, decomposition for example. Wind Energy The use of giant propellers to catch the force of the wind and use that force to turn a generator is the way wind turbines work. In theory the idea of using the power of something as ambient and as reliable as the wind is one of the most environmentally friendly methods to create electricity that is around. This is because there is no byproducts of any sort and the wind that is used can never be depleted. The major problem with using this as an energy source is the strength of wind needed to spin the propellers. This is because although there is wind everywhere in our world, the strength of this wind, on the most part, is not always strong enough to rotate the propellers due to their immense weight. Nuclear Energy Nuclear energy is one of the most dangerous forms of generating energy that we have in our current society. When it is harnessed properly and efficiently, it is also one of our most effective ways of producing energy. The basic concept of a nuclear reactor is similar to that of a coal burning station, to create heat to make steam to turn turbines. One major downfall with these power stations is the waste the produce. This waste is not CO2, but is radioactive waste that, if dispersed of correctly, would provide our society with a clean and efficient way to generate power, although this is not the case in the present time. Until there is a way to dispose of the nuclear waste efficiently, nuclear power will not become our primary source of power. Tidal Energy Tidal energy is a form of hydro power that converts the energy of the tides into a useable form of energy. Although this method is not widely used, it has great potential for the future of power generation. This is because the tides are far more predictable than the wind and solar energy. Tides are so predictable in fact; that we can tell exactly what they will be doing in two hundred years. The principle behind tidal power is the same as that of wind power. Underwater propellers are used to capture the energy of the flowing water, which is then converted to power by large turbines. This form of energy is just as clean as wind energy, but also has the additional benefit of not creating a poor spectacle as most of the generator is hidden underwater, instead of out in the open. Combustion Energy Also called mechanical energy, this is the act of using natural gasses or conventional fuels to power a combustion engine which then is used to rotate a turbine. This method is most commonly seen in small or backup generators that are made for private or commercial use. Two side effects of this type of energy is the noise that is made during combustion, and the byproduct of CO2. On the most part, these generators are used mainly in the form of small, portable types. This is because the forces that would need to be dealt with on a large scale generator are quite large and can be potentially hazardous. Task 4 Conclusion: When all the data is examined, hydroelectric power stations proved to be not only the most environmentally safe, equal with solar power, producing zero CO2 emissions, but it also was able to decent a fair amount of power. Even though the coal burning power station produced a lot more power, almost an eightfold on what hydro station produced, the hydro station produced zero percent of the emissions that the coal burning station did. In this respect, if the hydro station was to be increased to eight times its current size, theoretically, our society would be provided with more energy than the coal burning station produced, along with no emissions or byproducts. In contrast, the solar power plant also gave off no emissions, although the amount power produced was quite unsubstantial in comparison. As discussed earlier, the solar power plant would have to create eighteen times the amount of energy that it currently is producing to be a contender in power generation, but doing this would m ean that the size of area needed would be on the same scale of increase. This is feasible in terms of installing solar panels on every roof in our major cities for example, although the costs of doing such a thing would be far greater than that of upgrading the hydro power plant. It is recommended that the use of hydroelectric power stations is continued and their usage is increased. This is not only a one of the more environmentally friendly types of renewable energy, but it is also one of the more reliable according to the research completed. This method does not produce byproducts of any kind and does not make waste of any of the resources used in the production of power that is generated.
Subscribe to:
Posts (Atom)